Winding conductors
DN 120, DN 120 o (ENG)
DN 130 I (ENG)
DN 155 I (ENG)
DN 155 LP (ENG)
DNE 155 (ENG)
DNE 155 ls (ENG)
DNE 180 (ENG)
DNE 180 - 1 (ENG)
DNE 180 I (ENG)
DNE 180, DNE 180f, DNE 180 o (ENG)
DNE 180p (ENG)
DNE 180 s (ENG)
DNE 200, DNE 200 f, DNE 200 o (ENG)
DNE 200 t (ENG)
DNE 200 s (ENG)
- Category: Winding conductors
DN 120, DN 120 o
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED MECHANICAL STRENGTH |
|---|---|
| QUALITIES | DNE 120 DNE 120 o |
| STANDARDS | IEC 60317-12, NEMA MW 15-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | Polyvinylacetal |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.300 = 3.00 |
| Degree 2/mm/ | 0.300 = 4.00 |
| TEMPERATURE conf. IEC 172 | 120 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 155 |
| Wire melting conf. IEC (°C) | ›240 |
| Flexibility (elongation%) | 20% 1 d |
| Tangent & connecting bend | - |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 5H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | Foarte buna |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Very good mechanical properties. Used in engines and transformers in oil baths. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | DNE 130 l |
| STANDARDS | IEC 60317-4, NEMA MW 75-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | polyurethane |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.018 = 0.30 |
| Degree 2/mm/ | 0.020 = 0.30 |
| TEMPERATURE conf. IEC 172 | 130 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 155 |
| Wire melting conf. IEC (°C) | ›170 |
| Flexibility (elongation%) | 10% 1 d (0.3mm) |
| Tangent & connecting bend | ›125 |
| Melting at temperature(°C) | 340 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Used in all applications where tinning is required without removing the enamel; windings for small motors, transformers, telecommunications equipment, radio and TV systems. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | FENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | DNE 155 l |
| STANDARDS | IEC 60317-20, NEMA MW 79-C |
| INTERNAL NAME OF PRODUCT | ZALOM 155 SC |
| ENAMEL STRUCTURE | |
| Base sheath | polyurethane |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.018 = 2.00 |
| Degree 2/mm/ | 0.020 = 2.00 |
| TEMPERATURE conf. IEC 172 | 155 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 175 |
| Wire melting conf.IEC (°C) | ›200 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›140 |
| Melting at temperature(°C) | 375 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Very good thermal properties, very good tinning. Used in small transformers, relays, small motors, measuring instruments, meters. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | DNE 155LP |
| STANDARDE | IEC 60317-21, NEMA MW 80-C |
| INTERNAL NAME OF PRODUCT | ZALOM 155 NSC |
| ENAMEL STRUCTURE | |
| Base sheath | polyurethane |
| Covering sheath | polyamide |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.05 = 1.60 |
| Degree 2/mm/ | 0.05 = 1.60 |
| TEMPERATURE conf. IEC 172 | 155 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 175 |
| Wire melting conf.IEC (°C) | ›200 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›140 |
| Melting at temperature(°C) | 375 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| Standard solvents | Good |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Particularly malleable, very good tinning properties. Used on lathe with high class program. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED RESISTANCE TO HIGH TEMPERATURES |
|---|---|
| QUALITIES | DNE 155 |
| STANDARDS | IEC 60317-3, NEMA MW 5-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | Polyester or polyesterimide |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.05= 4.00 |
| Degree 2/mm/ | 0.05 = 5.00 |
| TEMPERATURE conf. IEC 172 | 155 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 175 |
| Wire meltingr conf.IEC (°C) | ›240 |
| Flexibility (elongation%) | 15%1 d |
| Tangent & connecting bend | ›155 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | The winding has class F heating resistance. Used in home appliance motors and similar applications. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH SELF-COUPLING PROPERTIES | |
|---|---|---|
| QUALITIES | DNE 155 ls | |
| STANDARDS | IEC 60317-35, NEMA MW 29-C | |
| INTERNAL NAME OF PRODUCT | - | |
| ENAMEL STRUCTURE | ||
| Base sheath | polyurethane | |
| Covering sheath | - | |
| Tinning sheath | polyamide | |
| PRODUCTION STRUCTURE | ||
| Degree 1/mm/ | 0.03 = 0.08 | 0.15 = 1.25 |
| Degree 2/mm/ | 0.03 = 0.08 | 0.15 = 1.25 |
| TEMPERATURE conf. IEC 172 | 155 | |
| PROPERTIES | ||
| Maximum temperature 1d,30 min(°C) | 175 | |
| Wire melting conf.IEC (°C) | ›220 | |
| Flexibility (elongation%) | 15% 1 d | |
| Tangent & connecting bend | ›155 | |
| Melting at temperature(°C) | 375 | |
| Short-circuit voltage | >1.5 x IEC | |
| Hard marking | - | |
| CHEMICAL PROPERTIES | ||
| 1.Rezistenta la: | ||
| Standard solvents | - | |
| Mineral oils | - | |
| F22,F134 refrigerants | - | |
| 2.Tinning temperature(°C) | 170-190 | |
| 3.Baking temperature | 160 | |
| USAGE | Self-coupling winding (connection) with soldering capacity that does not require further impregnation. Used for self-supporting coils, coils for speakers. | |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | |
| STANDARDS | IEC 60317-51, NEMA MW 79-C |
| INTERNAL NAME OF PRODUCT | |
| ENAMEL STRUCTURE | |
| Base sheath | polyurethane |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.018 = 2.00 |
| Degree 2/mm/ | 0.020 = 2.00 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 175 |
| Wire melting conf.IEC (°C) | ›230 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›160 |
| Melting at temperature(°C) | 390 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Rezistenta la: | |
| Standard solvents | Buna |
| Mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Good thermal and tinning properties. Used in relays with automatic control and transformers |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | |
| STANDARDS | IEC 60317-… NEMA MW 80-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | polyurethane |
| Covering sheath | polyamide |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.05 = 1.60 |
| Degree 2/mm/ | 0.05 = 1.60 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 175 |
| Wire melting conf.IEC (°C) | ›230 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›160 |
| Melting at temperature(°C) | 390 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Good |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| UTILIZARE | Very good malleability, very good tinning properties. Used on lathe with high class program. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH TINNING PROPERTIES |
|---|---|
| QUALITIES | DNE 180 l |
| STANDARDS | IEC 60317-23, NEMA MW 26-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | polyesterimide |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.03= 1.60 |
| Degree 2/mm/ | 0.03= 1.60 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 200 |
| Wire melting conf.IEC (°C) | ›280 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›160 |
| Melting at temperature(°C) | 470 |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Heat-resistant wire that can be tinned at a temperature of 470 ° C without first removing the enamel. Used in general purpose motors, household appliances, relays and transformers. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED RESISTANCE TO HIGH TEMPERATURES |
|---|---|
| QUALITIES | DNE 180; DNE 180f; DNE 180 o |
| STANDARDS | IEC 60317-8, NEMA MW 30-C, NEMA MW 74-C |
| INTERNAL NAME OF PRODUCT | ZALOM 180 HB |
| ENAMEL STRUCTURE | |
| Base sheath | Polyesterimide THEIC |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.02=4.00 |
| Degree 2/mm/ | 0.02=5.00 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 200 |
| Wire melting conf.IEC (°C) | ›340 |
| Flexibility (elongation%) | 15%1 d |
| Tangent & connecting bend | ›180 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4/5H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Good |
| mineral oils | Good |
| F22,F134 refrigerants | Good |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| UTILIZARE | High thermal properties and good chemical resistance. Used for household appliances, hermetically sealed motors, dry and oil bath transformers. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED RESISTANCE TO HIGH TEMPERATURES |
|---|---|
| QUALITIES | DNE 180p |
| STANDARDS | IEC 60317-22 NEMA MW 76-C |
| INTERNAL NAME OF PRODUCT | ZALOM 180NHB |
| ENAMEL STRUCTURE | |
| Base sheath | Polyesterimide THEIC |
| Covering sheath | Polyamide |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.05=3.15 |
| Degree 2/mm/ | 0.05=3.15 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 200 |
| Wire melting conf.IEC (°C) | ›300 |
| Flexibility (elongation%) | 15%1 d |
| Tangent & connecting bend | ›180 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 4/5H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Buna |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Very good malleability. Suitable for use in machines with high class programs. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH SELF-GLUING PROPERTIES |
|---|---|
| QUALITIES | DNE 180 s |
| STANDARDS | IEC 60317-37 |
| INTERNAL NAME OF PRODUCT | - |
| STRUCTURA EMAILULUI | |
| Base sheath | polyesterimide |
| Covering sheath | - |
| Tinning sheath | polyamide |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.15 = 0.80 |
| Degree 2/mm/ | 0.15 = 0.80 |
| TEMPERATURE conf. IEC 172 | 180 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 200 |
| Wire melting conf.IEC (°C) | ›340 |
| Flexibility (elongation%) | 10% 1 d |
| Tangent & connecting bend | ›180 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | - |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standards solvents | - |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature(°C) | 170-190 |
| 3.Baking temperature | 160 |
| USAGE | Self-coupling winding that does not require further impregnation. Used for self-supporting coils. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED RESISTANCE TO HIGH TEMPERATURES |
|---|---|
| QUALITIES | DNE 200; DNE 200f; DNE 200o |
| STANDARDS | IEC 60317-13, NEMA MW 35-C |
| INTERNAL NAME OF PRODUCT | ZALOM 200 HB |
| ENAMEL STRUCTURE | |
| Base sheath< | Polyester or polyesterimide |
| Covering sheath | polyamideimide |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.15 = 2.00 |
| Degree 2/mm/ | 0.15 = 4.00 |
| TEMPERATURE conf. IEC 172 | 200 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 220 |
| Wire melting conf.IEC (°C) | ›360 |
| Flexibility (elongation%) | 10% 1d |
| Tangent & connecting bend | ›180/250 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 6H |
| CHEMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Very good |
| mineral oils | Very good |
| F22,F134 refrigerants | Very good |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Very high thermal properties, high mechanical and chemical resistance. Used in engines and transformers in oil bath, ballasts (drossers), hermetically sealed motors, operating at temperatures higher than 200˚ C. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH INCREASED RESISTANCE TO HIGH TEMPERATURES |
|---|---|
| QUALITIES | DNE 200 t |
| STANDARDS | IEC 60317-26, NEMA MW 81-C |
| INTERNAL NAME OF PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | polyamideimide |
| Covering sheath | - |
| Tinning sheath | - |
| PRODUCTION STRUCTURE | |
| Degree 1/mm/ | 0.15 = 1.00 |
| Degree 2/mm/ | 0.15 = 0.50 |
| TEMPERATURE conf. IEC 172 | 200 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 220 |
| Wire melting conf.IEC (°C) | ›380 |
| Flexibility (elongation%) | 5% 1 d |
| Tangent & connecting bend | ›250 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | 6H |
| CHIMICAL PROPERTIES | |
| 1.Resistance at: | |
| standard solvents | Very good |
| mineral oils | Very good |
| F22,F134 refrigerants | Very good |
| 2.Tinning temperature(°C) | - |
| 3.Baking temperature | - |
| USAGE | Special thermal, mechanical and chemical resistance. Used for special motors, special relays, special transformers. |
- Category: Winding conductors
| ENAMELED TYPE WIRE | ENAMELED COPPER WIRE WITH SELF-GLUING PROPERTIES |
|---|---|
| QUALITIES | DNE 200 s |
| STANDARDS | IEC 60317-38 |
| INTERNAL NAME OF THE PRODUCT | - |
| ENAMEL STRUCTURE | |
| Base sheath | polyestermides |
| Sovering sheath | polyamideimide |
| Tin sheathing | polyamide |
| PRODUCTION STRUCTURE | |
| Grad 1/mm/ | 0.15 = 0.80 |
| Grad 2/mm/ | 0.15 = 0.80 |
| TEMPERATURE conf. IEC 172 | 200 |
| PROPERTIES | |
| Maximum temperature 1d,30 min(°C) | 210 |
| Wire melting conf.IEC (°C) | ›360 |
| Flexibility (elongation%) | 15% 1 d(0.4 mm) |
| Tangent & connecting elbow | ›180 |
| Melting at temperature(°C) | - |
| Short-circuit voltage | ›1.5 x IEC |
| Hard marking | - |
| Chemical properties | |
| 1.Resistance at: | |
| standard solvents | - |
| mineral oils | - |
| F22,F134 refrigerants | - |
| 2.Tinning temperature (°C) | 170-190 |
| 3.Baking temperature | 160 |
| USAGE | Conductor with heat-resistant self-coupling, with double enamel insulation and sheath. Used for TV deflector coils. |